Building New Worlds 2008

Our community has changed a lot in the past year going from a simple message board to a fully functioning Network where members can share blogs, photos, videos and much more. We have seen the growth in only seven short month reach over 190 people. Village collecting has become one of the hottest new things and with the new era of villaging we have seen 2008 will only get better. What Building New Worlds is planning for the next year is to now only bring more news and informartion on how to landscape you village but to start a progressive effort to become a one stop place to find all the tools a village collector would need to work with this wonderful and exciting hobby.
We wood like to invite you to join us at Building New Worlds today to see just how fun and exciting this hobby of village collecting really can be and we look forward to 2008 being the best year yet!

Waterfall

Author: Britt

If you have any question or need more explanations please ask at the forum:

http://www.freepowerboards.com/neodreaming/index.php Village Learning Center.

I started with gluing layers of styrofoam together in the basic shape I wanted. Then I used a hobby knife to cut out the river bedding. It should not be a smooth surface, that will only make the next step more difficult. Do not cut deep unless that is the effect you want, I will fill it up. I left an empty space for electricity equipment under the base in the back in case I want to use lights together with it. A bend at the top of the riverbed makes the base easier to integrate in a landscape - the river can appear from behind rocks or trees.









I added a thin layer of air dry clay in the riverbed and made it smoother with a tool (a butter knife will work if you don't have a tool). Then I started to add the shape of the flowing water. It does not have to be very detailed or perfectly done - this is just the base for the water. Make sure the river bedding is filled at the edges. If the clay doesn't want to stick dampen the styro slightly or you may need to make the styro surface more rough.





Continue with the whole waterfall in the same way. If it is a large area you have to do the next step before the clay has dried too much.












The whole river bedding is filled and I started to add the currents in the water and the whirls- under the waterfalls and where the water is forced to change direction by rocks etc.











I painted the base around the waterfall in a basic landscape color, brown in this case. Make sure the paint is waterbased or it will melt the styrofoam. (I am using my kids poster paint from the toy shop...!) The paint will mostly be covered later but I don't want the white styro base to show.
I shaped loose rocks from the clay and added them into and around the river bedding. I didn't make them very smooth, they should be irregular and have some cracks.



When everything was dry I glued the loose rocks into place and painted them very dark (black) and the water was painted blue. Do not worry about the colors, the idea is to cover the styro and clay at this stage. After a while I checked it and added more paint (made thinner with water)where the styro or clay wasn't completely covered.







The rocks were brushed with medium grey, without covering the deeper parts and then I dry brushed the areas sticking out with very light grey to highlight them.

I did this to all the rocks and also made the blue water a bit darker with grey paint. It should be darker now than the final result.












My rocks have moss so I brushed the areas I wanted mossy with dark green, avoiding to add paint in the deeper areas. I also painted some darker areas in the water- those will be in the shadow of plants later.

I used a glossy varnish to make the rocks close to the water look shiny from moisture. I also used it to seal the paint in the river bedding before starting the next step.

A glossy transparent paint thickener paste was added into the river bedding to create the effect of water. Be very careful with how this is done as this pattern of flowing water will be showing when it is finished.

The paste dries up clear, as long as it is white it still has to dry. As you can see I added a thicker layer under the waterfalls to shape foam and whirls. I decided to add another layer to get the effect I wanted in this case. It is better to apply several thinner layers than one thick.

When the paste was completely dry the final step: Dry brushing the paste very lightly with white or very light grey paint.

I attached this base to the rest of my landscape using wooden sticks or tooth picks instead of gluing it - I want to be able to use it again in several displays.

Plants and scatter material was added for the finishing touch.

-

Building New Worlds On line

NDN is very pleased to announce that we have opened Building New Worlds on line store. Our newest project features the work of Neo Dreams. The founder of NDN has created a line of village display bases that we think you will be as excited about as we are. Please visit the web site where the store is now featured.

This month preorders from Lemax-Spookytown.com should be coming in so if you ordered from there yet you should be getting those soon we hope. While you are thinking about the new pieces check out our message board for information on what villagers are doing right now to get ready for the upcoming season. Ask questions if you are having issues with getting started or need help.

For all this and more news please check out our site at www.neodreamsworld.com